Sheet Goods

Elias Woodwork can provide various sheet goods to accommodate your project needs. Some of these sheet goods are used in the manufacturing process which allows us to make them available to our customers as “cut to size” pieces, however some sheet goods are kept in stock to complement our product lines and are sold as “whole sheets” only. Please read each of the sheet goods descriptions and charts carefully for information on which sheet goods are stocked or special ordered and whether they are “cut to size” or “whole sheets”. Each of the sheet goods products can be ordered with stains and clear coatings to match doors, molding and accessories.

 

Veneers

Wood Veneer 4’ x 8’ with 10 mil backer are not sold as cut-to-size and are available in 4’ x 10’ sheets by special order only. Delivery time is based on availability.

Wood Veener 2’ x 8’ with Pressure Sensitive Adhesive backer (PSA by 3M) are not available as cut-to-size. Delivery time is based on availability.

Veneer on Veneer (Two Ply) is available in 4’ x 8’ sheets only. Delivery time is based on availability.

Plywood

Veneer on 1/8” core, 4’ x 8’, Good One Side (G1S) can be ordered as 4’ x 8’ sheets or cut-to-size. Veneer is bonded to a 1/8”core. Please note when ordering cut-to-size that the grain direction will be dictated by the height.

Veneer on 5.2mm core, 4’ x 8’, Good Two Sides (G2S) can be ordered as 4’ x 8’ sheets or cut-to-size. Veneers are bonded to a 5.2mm core. Please note that when ordering cut-to-size that the grain direction is dictated by the height.

Veneer on 3/8” core, 4’ x 8’, Good Two Sides (G2S) can be ordered as 4’ x 8’ sheets or cut-to-size. Veneers are bonded to a 3/8” core. Please note that when ordering cut-to-size that the grain direction is dictated by the height.

Veneer on 5/8” core, 4’ x 8’, Good Two Sides (G2S) can be ordered in 4’ x 8’ sheets or cut-to-size. Veneer is bonded to a 5/8” core. Orders requiring edgebanding must indicate which edges are to be edgebanded. Please note that when ordering cut-to-size that the grain direction will be dictated by the height.

Veneer of 3/4” core, 4’ x 8’, Good Two Sides (G2S) can be ordered in 4’ x 8’ sheets or cut-to-size. Veneer is bonded to a 3/4” core. Orders requiring edgebanding must indicate which edges are to be edgebanded. Please note that when ordering cut-to-size that the grain direction will be dictated by the height.

HPL

HPL (High Pressure Laminate) is available in thermofoil or polyester. It is available cut to size, up to 48" x 96" sheets.
PSA
Plywood
High Pressure Laminate (HPL)
Availability