Tenon Cabinet Doors
General Door Information
Orders
Elias Woodwork accepts orders either in metric to the nearest millimeter or in inches to the nearest 1/16” . Whenever you are ordering or speaking with a Customer Service Representative, please refer to cabinet doors WIDTH by HEIGHT.
From a single vanity to a condominium project we will accept orders from one door to several thousands. Although our manufacturing system has been engineered to be able to produce 1 door almost as efficiently as 1000 there will still always be some economies of scale that may influence pricing on large orders. For this reason we may be able to work out lower prices for large projects when you need that extra edge to get the job. This project pricing is a job by job basis and is completely separate from your standard discount.
Tenon Door Construction
Elias Woodwork manufactures it’s wood tenon style cabinet doors without the use of any metal pins. All solid panels are installed with ¼” rubber space balls to allow for expansion in different environmental situations. All plywood panels are glued in on all four sides as there is no concern with expansion and this prevents any possible vibration problems in the future with the plywood panel.
Center Rails on Tenon Doors
| Defaults: | Cabinet doors over 48” in height will have a horizontal center rail inserted. |
| Cabinet doors over 24” in width will have a vertical center rail inserted. | |
| Cabinet doors over 48” in width will have 2 vertical center rails inserted. |
All rails will be centered to create even sized panels. If you require a 5 piece drawer front with a solid panel over 24” in width but do not wish to have the center rail you may order the panel with horizontal grain.
Tolerance
Elias Woodwork warrants that it’s wood cabinet doors have a size tolerance of +/- 1mm. Warping is always a factor with wood cabinet doors. 
Elias Woodwork warrants that any door or drawer front under 24”x48”will have an allowance of 1/8”. Doors or drawer fronts between the sizes of 24”x48” and 24”x72” will have an allowance of ¼”. Any doors or drawer fronts wider than 24” or higher than 72” will not be warranted for warpage. Note: This applies to doors and drawer fronts with one vertical grain panel.
Sample Doors
Samples doors that will be used as selling tools or for a showroom display are available at an additional 20% off your current discounted price. Suggested sizes are 11”x15”, 12”x15” and 13”x16”. All sample doors are supplied with a label that details the specifications of the door for ease of selling and ordering.